BCS Line - Repeater

223
1.11.6 Repeater
The device supports relay settings for the wireless relay IPC to extend video transmission
distance and range.
Prerequisites
● The device has the built-in Wi-Fi module.
● The IPC has wireless relay module.
This function is supported on select models.
Procedure
Step 1 Power on the NVR and wireless relay IPC, and connect all IPCs to the NVR through
Wi-Fi.
Step 2 Select
Main Menu
>
NETWORK
>
REPEATER
.
The
REPEATER
interface is displayed. See Figure 4-228.
● Green connection line represents the successful connection between channel and
wireless IPC.
● Auto cascade
：
After selecting auto cascade, the IPC can cascade to NVR
automatically.
Figure 4-228
Step 3 Select
Manual Cascade
.
The
Manual Cascade
interface is displayed. See Figure 4-229.
Copyright © NSS Sp. z o.o.
223 User‘s Manual