Figure 4-280 Illegal Login
Step 2 Select
Enable
and configure parameters. See Table 4-93.
Table 4-93 Illegal login parameters
Parameter Description
Alarm-out Port
The alarm device (such as lights, sirens, etc.) is connected to the
alarm output port. When an alarm occurs, the NVR device transmits
the alarm information to the alarm device.
Post Alarm
When the alarm ends, the alarm extended for a period of time. The
time range is from 0 seconds to 300 seconds.
Buzzer Select the check box to activate the buzzer when an alarm occurs.
Alarm Tone
Check the box and then select the corresponding audio file from the
dropdown list. System plays the audio file when the alarm occurs.
See "4.17.1 File Management" to add audio file first.
Log
Select the check box, the NVR device records the alarm information in
the log when an alarm occurs.
Send Email
Select the check box. When an alarm occurs, the NVR device sends
an email to the set mailbox to notify the user.
You need to set the email first. For details, see "4.11.10 Email".
Copyright © NSS Sp. z o.o.
User‘s Manual 270
To Next Page
Loading...
General