➠ The ne
xt passport is scanned, and the same screen is displayed.
Repeat this process until scanning of all passports is completed.
● You can also press [Density] to change the settings for each passport.
7
Press [Start Copy].
➠ The scanned passports ar
e printed.
● To cancel copying, press [Cancel]
[Yes]. Canceling Copy Operations(P. 275)
● Use [Status Monitor] to vie
w the copy job status.
Viewing the Print Job Status and Log(P. 198)
Copying Passport (5 Lines LCD Model)
1
On the operation panel, press [Passprt Cpy] in the [Home] screen, and press .
[Home] Screen(P. 113)
➠ The [Passport Cop
y] screen is displayed.
2
Select a combination of the number of passports and whether to use 2-sided
printing.
[2 on 1 (2-Sided)]
Combines two passports onto one side of a sheet of paper by copying with 2-sided printing. Copies four
passports onto both sides of a sheet of paper with 2-sided printing.
[4 on 1 (2-Sided)]
Combines four passports onto one side of a sheet of paper by copying with 2-sided printing. Copies eight
passports onto both sides of a sheet of paper with 2-sided printing.
[2 on 1]
Combines two passports onto one side of a sheet of paper.
[4 on 1]
Combines four passports onto one side of a sheet of paper.
3
Press
.
➠ The cop
y screen is displayed.
4
Set the number of copies.
Press / [Number of Copies] set the number of copies , or use the numeric keys to
enter the number of copies.
* When you use Passport Cop
y to make copies, the copy ratio is set automatically according to the size of the
paper used for copying and the number of passports to combine. You can also press [Copy Ratio] to change
the copy ratio manually.
Copying
273
To Next Page
Loading...
