[Auto IP]
Normally
, set to [On]. Although priority is given to the IP address allocated with DHCP, if there is no
response from DHCP, Auto IP will be used.
3
Select [<Apply>] and press
.
4
Restart the machine.
Restarting the Machine(P. 106)
➠ The settings ar
e applied.
Perform a connection test to check whether the IPv4 address is correctly congured.
Checking the
Network Status and Settings(P
. 89)
Checking the Currently Set IP Address
● On the scr
een in Step 3, select [Check Settings] and press
to check the current IP address setting. If the
IP addr
ess is displayed as "0.0.0.0," it is not correctly congured.
If the IP Address Is Changed after Installing the Printer Driver
● In Windows, you must add a new port.
Conguring a Printer Port (Windo
ws)(P. 178)
If you do not know which port is being used, see the following:
Viewing the Printer Port(P. 597)
● In macOS, you must r
e-register the machine on the Mac. For details about registering the machine, see the
manual of the driver at the online manual site.
https://oip.manual.canon/
* If you are using DHCP to automatically obtain the IP address of the machine, the IP address may be changed
automatically.
Setting Up
74
To Next Page
Loading...
