11
Hold the roll paper by the middle of the leading edge
and align the right edge with the right edge of the pa-
per core of the Rewind Spool. With the left and right
edges of the roll paper evenly taut, tape the middle to
the paper core to fasten it.
12
Making sure the roll paper is not slack, tape the left
and right side of the leading edge to the paper core.
Note
• When rewinding heavyweight paper, use strong adhesive tape to fasten it. Otherwise, a rewinding problem may
result.
13
Press the ▼ button to make the roll a little slack.
iPF8400S
Loading the Rewind Spool on the Media Take-up Unit
User's Guide
Handling and Use of Paper Media take-up unit
511
To Next Page
Loading...
