Setting Item Description, Instructions
Adjust
Printer
Feed
Priority
Adj.
Quality
Auto(OtherPaper) The printer prints and reads a test pattern for automatic ad-
justment of the feed amount. Note that this function takes
more time and consumes more ink than Auto(GenuinePpr).
(See "Automatic Banding Adjustment.") ➔ P.719
Manual Use this mode with highly transparent media or other paper
for which Auto(GenuinePpr) or Auto(OtherPaper) cannot
be used.
Print a test pattern for adjustment of the feed amount based
on the type of paper. (See "Manual Banding Adjust-
ment.") ➔ P.720
Adjust
Length
Adjust-
ment-
Print
A:High Print a test pattern for particular types of paper to compen-
sate for paper stretching or shrinkage, after which you enter
the amount of adjustment. (See "Adjusting Line
Length.") ➔ P.722
B:Standard/Draft
Change
Settings
A:High Displayed when you have selected Feed Priority > Adj. Pri-
ority > Print Length.
Adjustment relative to the amount of stretching or shrinkage
of the current paper.
Enter either the adjustment results from AdjustmentPrint or
the discrepancy that you measured (as a percentage).
For paper that tends to stretch, increase the feed amount by
choosing a higher adjustment value. For paper that tends to
shrink, decrease the feed amount by choosing a lower ad-
justment value. (See "Adjusting Line Length.") ➔ P.722
B:Standard/Draft
Calibra-
tion
Auto Adjust Execute color calibration.
A test pattern for color calibration is printed and the adjust-
ment values are set automatically.
(See "Color Calibration Using the Printer Sensor.") ➔ P.735
Calibration Log The Date, Paper Type, and Adjustment Type for which col-
or calibration was executed are displayed on the Display
Screen where you can confirm them.
Common calibration and unique calibration are the Adjust-
ment Type of color calibration.
When paper is set in the printer, the history of effective color
calibration for the set paper is displayed.
When paper is not set in the printer, the latest history among
common calibration or unique calibration is displayed.
Also, a hyphen (-) is displayed when there are no execution
results.
(See "Color Calibration Using the Printer Sensor.") ➔ P.735
Use Adj. Value Choose Disabled > OK if you prefer not to apply the color
calibration adjustment value in print jobs. However, printer
driver settings are given priority.
Choose Enabled > OK to apply the color calibration adjust-
ment value in print jobs. However, printer driver settings are
given priority.
Set Exec. Guide If you select On, a message is displayed on the control panel
at the timing recommended for executing color calibration.
Return Defaults Clear the color calibration adjustment value and the execu-
tion log.
Mainte-
nance
Head Cleaning Clean the Printhead. (See "Cleaning the Print-
head.") ➔ P.818
Choose Head Cleaning A if printing is faint, oddly colored, or
contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or if print-
ing is not improved by Head Cleaning A.
Nozzle Check Print a test pattern to check the nozzles.
iPF8400S
Menu Settings
User's Guide
Control Panel Printer Menu
595
To Next Page
Loading...
