Canon IPF8400S - Page 596

Setting Item Description, Instructions
Mainte-
nance
Replace P.head Execute when replacing the Printhead. Follow the instruc-
tions displayed to complete the required procedure. (See
"Replacing the Printhead.") ➔ P.819
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Repl. maint cart Execute when replacing the Maintenance Cartridge. Follow
the instructions displayed to complete the required proce-
dure. (See "Replacing the Maintenance Car-
tridge.") ➔ P.831
Head In-
fo
Printhead L Indicates information about the printhead.
Printhead R
Repl. S. Cleaner Replace the Shaft Cleaner. Follow the instructions displayed
to complete the required procedure. (See "Replacing the
Maintenance Cartridge.") ➔ P.831
Change Cutter Replace the Cutter Unit. Follow the instructions displayed to
complete the required procedure. (See "Replacing the Cutter
Unit.") ➔ P.827
Once you replace the Cutter Unit, you can also reset the cut
counter.
Interface
Setup
EOP Timer Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
TCP/IP IPv4 IPv4 Mode Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.
Protocol DHCP Specify the protocol used to configure the IP address auto-
matically.
BOOTP
RARP
IPv4
Settings
IP Address Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
The value that was automatically configured is displayed if
you have set IPv4 Mode to Automatic.
Subnet Mask
Default G/W
DNS
Settings
DNS Dync update Specify whether DNS server registration is updated automati-
cally.
Pri. DNS SrvAddr Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Name Specify the DNS domain name.
IPv6 IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
DNS
Settings
DNS
Dync
update
Statefull
Addr
Specify whether DNS server registration is updated automati-
cally.
State-
less
Addr
Pri. DNS SrvAddr Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Name Specify the DNS domain name.
NetWare NetWare Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Menu Settings iPF8400S
User's Guide
Control Panel Printer Menu
596