Important
Do not open the Document Cover or remove the print head alignment sheet on the Platen
Glass until adjusting the print head position is completed.
If the message "Failed to scan the head alignment sheet" appears, press the
OK
button.
Refer to "
Troubleshooting" in the on-screen manual:
.
Note
If the print results are still not satisfactory after adjusting the print head position as
described above, adjust the print head position manually from a computer.
For details, refer to the on-screen manual:
.
To print and check the current head position adjustment values, select Print head align
value in the Maintenance menu.
Page top
Seite 106 von 922 SeitenAligning the Print Head
To Next Page
Loading...
