Advanced Guide
>
Faxing
>
Registering Recipients for Speed Dialing > Registering Recipients Using the
Operation Panel of the Machine
F003
Registering Recipients Using the Operation Panel of the
Machine
Speed dialing allows you to dial fax/telephone numbers by simply pressing a few buttons.
The following speed dialing methods are available:
Coded Speed Dialing
Registering the recipient's fax/telephone number and name to the coded speed dial allows you to
send a fax by entering the coded speed dial code assigned to that number or using the
button
to select the coded speed dial code after pressing the
Coded Dial
button.
Registering Recipients to Coded Speed Dial
Group Dialing
Register two or more registered coded speed dial codes as a group in advance. You can send the
same document to all the registered recipients in the group.
Registering Recipients for Group Dial
You can register up to 20 recipients in total of coded speed dial code and group dial code.
Note
To change information registered to the coded speed dial or the group dial, see
Changing
Registered Information
.
To delete information registered to the coded speed dial or the group dial, see
Deleting Registered
Information
.
To print a list of the recipient's fax/telephone numbers and names registered, see
Printing a List of
the Registered Destinations
.
You can register, change, or delete information registered to the coded speed dial or the group dial
using Speed Dial Utility.
Using Speed Dial Utility
Page top
Seite 652 von 922 SeitenRegistering Recipients Using the Operation Panel of the Machine
To Next Page
Loading...
