Canon MX360 Seires - Page 653

Advanced Guide
>
Faxing
>
Registering Recipients for Speed Dialing
>
Registering Recipients Using the
Operation Panel of the Machine
> Registering Recipients to Coded Speed Dial
F004
Registering Recipients to Coded Speed Dial
Before you can use the coded speed dialing feature, you need to register the recipients' fax/telephone
numbers.
The registration methods may differ depending on the model.
Registering to MX410 series
Registering to MX360 series
Registering to MX410 series
Register the recipients' fax/telephone numbers following the procedure below.
1.
Make sure that the machine is turned on.
2.
Press the
FAX
button.
The Fax standby screen is displayed.
3.
Press the
Menu
button.
The Fax settings screen is displayed.
4.
Use the button to select TEL no. registration, then press the
OK button.
5.
Use the button to select Coded speed dial, then press the
OK button.
The screen to select a coded speed dial code is displayed.
Note
If you select a code already used as a coded speed dial, the fax/telephone number is
displayed. If you select a code already used as a group dial, (Not available) is displayed.
6.
Use the button or the Numeric buttons to select an unoccupied coded speed dial
code, then press the
OK button.
7.
Use the button to select a registration method, then press the
OK button.
8.
Register the recipients' fax/telephone number.
Register the recipients' fax/telephone number depending on the registration method selected
in step 7.
From call log (OUT)
When you select this registration method, the screen to select the fax/telephone
number from the outgoing call logs is displayed.
1.
Use the
button to select a fax/telephone number, then press the
OK
button.
2.
When Telephone number is displayed, press the
OK
button.
The fax/telephone number selected from the outgoing call logs is displayed.
3.
Check the fax/telephone number, then press
OK
button.
The fax/telephone number is registered to the machine. Next, go to step 9.
From call log (IN)
Seite 653 von 922 SeitenRegistering Recipients to Coded Speed Dial