When you select this registration method, the screen to select the fax/telephone
number or the name from the incoming call logs is displayed.
1.
Use the
button to select a fax/telephone number or a name, then press the
OK
button.
2.
When Telephone number is displayed, press the
OK
button.
The fax/telephone number selected from the incoming call logs is displayed.
3.
Check the fax/telephone number, then press
OK
button.
The fax/telephone number is registered to the machine. Next, go to step 9.
Note
This registration method may not be available depending on the country or region
of purchase.
Direct entry
The screen to register the recipient's fax/telephone number and name is displayed.
1.
Use the
button to select Telephone number, then press the
OK
button.
The screen to enter the fax/telephone number is displayed.
2.
Use the Numeric buttons to enter the fax/telephone number you want to register.
3.
Press the
OK
button.
The fax/telephone number is registered to the machine. Next, go to step 9.
Note
You can enter the fax/telephone number up to 60 digits (40 digits for the US,
Canada, and Korea), including spaces.
For details on how to enter or delete characters or numbers, refer to
Preparing for Faxing
.
Press the
Redial/Pause
button to enter a pause.
When Telephone line type in FAX user settings under Fax settings is set to
Rotary pulse, you can enter a tone ("T") by pressing the
Tone
button.
9.
Make sure that Name is displayed, then press the
OK button.
The screen to enter the recipient's name is displayed.
10.
Use the Numeric buttons to enter the recipient's name.
Note
You can enter the name up to 16 characters, including spaces.
For details on how to enter or delete characters, refer to Preparing for Faxing
.
11.
Press the
OK
button to finalize registration.
Note
To register another recipient's number and name to a coded speed dial, repeat steps 6
to 11.
To return to the Fax standby screen, press the
Stop
button.
Seite 654 von 922 SeitenRegistering Recipients to Coded Speed Dial
To Next Page
Loading...
