#099
The
Stop
button was
pressed during
transmission.
The
Stop
button was pressed to
cancel transmission of the
document. Resend it if necessary.
#412
The fax could not be sent
from the computer.
The fax could not be sent from the
computer. Check the following and
redo operation.
The machine is connected to the
computer correctly.
The recipient's fax/telephone
number is correct.
The recipient's fax/telephone
number you dialed is not busy.
Errors When You Receive a Fax
If an error occurs when you receive a fax, the error number is printed in the RX report (there are
some errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No.
Cause
Action
#003
It takes too long to receive a
page.
Contact the sender and have the
sender divide the fax or set the image
quality (Fax resolution) to a lower
setting and resend it.
#005
No answer.
When receiving a fax manually, the
machine could not detect the signals
from the sender's fax machine.
Contact the sender and have the
sender resend it, or set the machine
to receive the fax automatically.
#037
Memory is full.
The machine could not receive a fax
because its memory is full.
Delete contents in memory, then ask
the sender to resend the fax. See
Deleting a Document in Machine's
Memory
.
#046 Reception has been
rejected due to the
specified fax rejection
condition.
Reception has been rejected
because the fax matches the fax
rejection condition specified by Fax
reception reject in Security control
under Fax settings.
For details, see
Rejecting Fax
Reception
.
#099
The
Stop
button was
pressed during reception.
The
Stop
button was pressed to
cancel reception of the fax. Contact
the sender and have the sender
resend it if necessary.
Page top
Seite 693 von 922 SeitenSummary of Reports and Lists
To Next Page
Loading...
