8 • Troubleshooting
Doc. 065031-04 1/08 177
The upper limit must be higher than the lower limit. Error page 249
The Warning threshold must be higher than the Limit
threshold.
Error page 249
The Warning threshold must be lower than the Limit
threshold.
Error page 249
There was already an AcqOff command for this channel
before.
Warning page 250
There was already an AcqOn command for this channel
before.
Warning page 250
This function cannot be adjusted by the user. Abort page 250
This operation may affect the oven's operation on
timebase x, which is currently running a batch.
Warning page 250
Two AcqOn commands for the same channel. The
second chromatogram will overwrite the first.
Error page 250
Unknown error code. Warning page 251
Unknown format of the card data. Error page 251
USB/LAN communication error. Please check
communication cable and instrument's power.
Abort page 235
Value for [name] parameter is not within valid range.
Value passed (x) will be substituted by y.
Warning page 242
Value x replaced by valid table entry y. Warning page 242
X position error. Abort page 251
You do not have the privilege to approve the module's
qualification.
Error page 252
You do not have the privilege to change the performance
limits.
Error page 252
You do not have the privilege to change the qualification
intervals.
Error page 252
TC-Related Audit Trail Error Message Default Severity
Level
See
To Next Page
Loading...
