Dräger Primus Infinity Empowered - General Information; Technical Data

Technical data
248
Instructions for use Primus Infinity Empowered SW 4.5n
Technical data
General information
Units of measurement for pressure 1 hPa = 1 mbar = 1 cmH2O
100 kPa = 0.1 MPa = 1 bar = 1 kPa x 100
All indicated values and accuracy levels
apply at 20 °C (68 °F), 60 % relative hu-
midity, and 1013 hPa (760 mmHg).
The accuracy levels indicated below vary
depending on ambient pressure, tempera-
ture, and relative humidity. If one of the
ambient conditions is changed up to the
permissible limit, the accuracy of the cor-
responding value can change by up to
50 %. If more than one of the ambient con-
ditions are changed, the accuracy may
change by up to 100 %.
All patient-related volume values and flow
values have been standardized to the cur-
rent ambient conditions. (ATPD)