EasyManua.ls Logo

Dräger Primus Infinity Empowered - Pressure Mode Ventilation Mode

Dräger Primus Infinity Empowered
277 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
110
Instructions for use Primus Infinity Empowered SW 4.5n
Pressure Mode ventilation mode
Pressure is a pressure-controlled ventilation mode
with fixed pressure limitation PINSP and frequency
freq. (former PCV), as well as with optional syn-
chronization (former SIMV(PC)) and variable pres-
sure support for spontaneous breathing efforts
(former SIMV(PC)+PS, optional).
A continuous pressure is applied to the patient dur-
ing the inspiratory time T
INSP. The rate at which the
pressure curve rises is pre-set via the rise time
TS-LOPE. Synchronization and pressure support are
controlled by the sensitivity of the flow trigger and
the level of
PPS. The maximum time interval for
controlled ventilation is set via the frequency. To
maintain a constant frequency, a time interval trig-
gered prematurely is compensated in the next cy-
cle.
Changes in lung compliance and ventilation param-
eters influence the tidal volume.
Some settable values are limited or mutually exclu-
sive so that specific combinations of therapy set-
tings are not possible, e.g., T
INSP 6.9 s at Freq.
100/min
098
25%
Pressure Trigger indicator
Trigger indicator
Trigger
on
PPS
on
Flow trigger Flow-trigger window
Time [s]
P
INSP
Time [s]
PPS
Flow
T
INSP
TSLOPE
TEXP
1/Freq.

Table of Contents

Other manuals for Dräger Primus Infinity Empowered

Related product manuals