Technical data
264
Instructions for use Primus Infinity Empowered SW 4.5n
Pin assignment:
1
2
3
4
5
6
7
8
9
Shields
NC, not connected
TX, transmit
RX, receive
DTR, data terminal ready
GND, ground
DSR, data set ready
RTS, request to send
CTS, clear to send
NC, not connected
DTR and DSR, as well as RTS and CTS are internally con-
nected. Hardware handshake is not supported.
Settings 1200 or 9600 Baud
Even parity
8 data bits
1 stop bit
IV System (Dräger Base) Power supply for IV System
SpO
2 For connecting an SpO2 sensor
To Next Page
Loading...
