Getting started
90
Instructions for use Primus Infinity Empowered SW 4.5n
The workstation switches to the Standby mode af-
ter completing the minimal self test.
To start Primus Infinity Empowered:
1 Set the safety knob for O
2 emergency delivery
to 0 and press it inwards.
2 Select the fresh-gas setting and ventilation
mode, see "Operation" on page 91.
WARNING
Risk of device failure and/or patient injury
Canceling the self test may lead to malfunc-
tions; greater attention is required during op-
eration.
Always perform a complete self test, unless
acting in an emergency situation. If canceled
for an emergency, perform a complete self test
as soon as practicable.
To Next Page
Loading...
