Electric starting system
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_6_3.27.1.html[11/12/2015 18:40:21]
Note
The starter motor retaining screws are assembled with threadlocker.
Slide out the starter motor and gasket (2).
Refitting the starter motor
Inspect the condition of the gasket (2) and renew if necessary.
Place the gasket (2) and the starter motor on the crankcase and tighten the retaining screws (1) to a torque of 10 Nm (Min. 9 Nm - Max. 11
Nm) (Sect. 3 - 3,
Engine torque settings).
To Next Page
Loading...
