Lights and indicating devices
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_6_4.28.1.html[11/12/2015 18:40:22]
Insert a spacer (7) to a screw (10), positioning it as indicated.
Start screw (10) in its thread on the central clip (11) of headlight cover (8).
Start the other two screws (10) in their thread on the side clips (11) of headlight cover (8).
Tighten the screws (10) to a torque of 3 Nm ±10% (Sect. 3 - 3,
Frame torque settings).
Reconnect headlight (B) and turn indicator (E) connectors.
Reconnect the instrument panel wiring (A).
Position connector (B) onto plate (C) and the latter on the bottom yoke, fastening it with nut (2). Tighten the nuts (2) to
a torque of 10 Nm ±10% (Sect. 3 - 3,
Frame torque settings).
To Next Page