Lights and indicating devices
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_6_4.28.1.html[11/12/2015 18:40:22]
Refit the instrument panel cover (1) tightening the screws (8) to a torque of 1.5 Nm ±10% (Sect. 3 - 3, Frame torque
settings).
Changing bulbs
Changing the headlight bulbs
Before replacing a burnt out light bulb, ensure that the replacement bulb has the same voltage and power rating as
specified for the lighting device in question (Sect. 3 - 1.1,
Lights/instrument panel).
Warning
The halogen light bulbs in the headlight become hot when switched on and remain hot for some time after they are
switched off. Allow bulbs to cool before replacing them.
The position of the light bulbs in the headlight is as indicated below: low beam (LO), high beam (HI) and parking light (A).
To Next Page
Loading...
