Instruments
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_6_7.31.1.html[11/12/2015 18:40:23]
ABS disabling function (796 ABS)
This function disables the ABS control unit.
This operation must be carried out with the vehicle stopped (key ON).
To disable the ABS control unit, access the menu on the “DISAB ABS” page and hold down switch (1) in position B “t“ for
3 seconds.
At the end of the 3 seconds, the flashing ABS light (10) on the instrument panel indicates the disabling.
From this moment, the ABS control unit is disabled; it is automatically re-enabled at the next Key-Off / Key-On.
At the next Key-On the instrument panel indicates that it is operative by keeping the ABS light (10) off.
If there are problems with the ABS system, the instrument panel indicates its malfunction by keeping the ABS light (10)
on steady, the EOBD light (8) on steady and the ABS error in the menu.
Important
This indicator is activated only at a speed above or equal to 10 km/h; at a speed lower than 10 km/h the ABS control unit
does not perform the diagnostics.
To Next Page
Loading...
