Instruments
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_6_7.31.1.html[11/12/2015 18:40:23]
After use, disconnect the DDA from the main wiring harness.
Erase DDA
This function enables you to delete the data saved on the DDA: the DDA must be connected to the motorcycle wiring.
To delete the data, enter the menu and select the “Erase DDA” page.
If you press switch (1) in position B “t“ for 3 seconds and the DDA is not acquiring data, the message “WAIT…” is shown
on the display for 10 seconds. After 10 seconds, the message “ERASE OK” appears for 3 seconds, to confirm that the DDA
data has been deleted.
If switch (1) is pressed in the B “t“ position for 3 seconds while the DDA data logger is acquiring data, the data logger
memory is not erased and the display shows message “FAIL“ for 3 seconds.
To Next Page
Loading...
