Fork - steering head: Steering
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_7_10B.49.1.html[11/12/2015 18:40:34]
Note
In the “ABS“ version the hose clip marked with an arrow is not present.
Loosen the screw (3) securing the steering head (2) to the steering head nut (12).
Remove the steering head (2).
With the service tool no. 88713.1058 loosen the nut (12) and unscrew it from the steering shaft.
Slide the sealing ring (8), the inner race (A) and the ball race (B) of the upper bearing (5) off the steering shaft.
Remove the bottom yoke (15) complete with the steering shaft from the frame tube.
Remove the ball race (B) of the lower bearing (6).
The inner race (A) of the lower bearing (6) and the relative sealing ring (18) will remain on the steering shaft.
Using a universal puller (see figure) remove the inner race (A) and the spacer (13) from the steering shaft, taking care
not to damage the seat.
To Next Page
Loading...
