Clutch assembly: primary drive gears
file:///D|/Manuales/Para%20recolocar/MOTOS/DUCATI/DUCATI/M796/wsm/EN/M796_ABS_11_9_6C.74.1.html[11/12/2015 18:40:49]
Fit the internal spacer (4) to the input shaft with its flat side facing outwards. Install the inner bush (2) and clutch drum
(1) with driven gear (A) complete with roller bearing (3).
Operations Section reference
Refit the complete clutch
assembly
9 - 6.1, Refitting the APTC clutch
Refit the clutch cover 9 - 6.2,
Refitting the clutch cover
Connect the oil pressure sensor 6 - 5,
Checking the indicating devices
Refill the engine with oil 4 - 3,
Changing the engine oil and
filter cartridge
To Next Page