Epson Stylus Pro 10000 - Page 163

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Disassembly & Assembly Disassembly 156
7. Move the carriage to the left end. (Refer to Figure 4-95.)
Figure 4-95. Head Weight Set Removal Position
8. Remove 3 screws securing the weight to the carriage.
Figure 4-96. Screws Securing Weight 2
9. Remove Weight and Weight Retainers (x2).
Figure 4-97. Weight and Weight Retainers
CP M3X14
W Sems M3X8
Weight Weight Retainers
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com