Epson Stylus Pro 10000 - Page 223

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 216
3. Correction data input screen. Screen for the "Va" to" Vd" input.
Figure 5-26 showing screen menu sequence.
Figure 5-26.

Cursor is displayed to the column that is inputting at present.
 When [SelecType] key is pushed the cursor migrates to the right.
 When [Item] key is pushed the cursor migrates to the left.
 When the [Enter] key is pushed display moves to the menu next to 1 hierarchy.
 When the [Pause] key is pushed the display returns to 1 hierarchy.
 When the [Enter] key is pushed during the correction value input of [Vd], D/A
correction value of the color settles and display moves to [K measure Va] of 1
hierarchy.
4. Selection of the parameter
Select the voltage parameter for "Va" to" Vd".
Figure 5-27 showing parameter menu sequence.
Figure 5-27.
Select the value with
Paper Feed +/- key
Item
Item
Item
Item
Item
SelecType
SelecType
SelecType
SelecType
SelecType
K Measure Va : xx.xxxV
K Measure Vb : xx.xxxV
K MeasureVc : xx.xxxV
K Measure Vd : xx.xxxV
K Measure Va : xx.xxxV
Select the value with
Paper Feed +/- key
Select the value with
Paper Feed +/- key
Select the value with
Paper Feed +/- key
Select the value with
Paper Feed +/- key
Item
Item
Item
Item
SelecType
SelecType
SelecType
SelecType
Enter
Enter
Enter
Enter
Pause
Pause
Pause
Pause
K Confirm Va
K Confirm Vb
K Confirm Vc
K Confirm Vd
KVa Output
KVb Output
KVc Output
KVd Output
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com