Epson Stylus Pro 10000 - Page 232

EPSON Stylus Pro 10000/10000CF/10600 Revision D
Adjustment Self-Diagnostics 225

Move the cursor to the right with "SelecType" key.
 Move the cursor to the left with "Item" key.
 Cursor move to the left edge when you press the "SelecType" key at the right edge.
 Cursor move to the right edge when you press the "Item" key at the left edge.
 Cursor skip the space area.
 When the [Enter] key is pushed with [Head * -1]-[Head * -4], display moves to the
menu next to 1 hierarchy.
 When the [Enter] key is pushed with [Head * -5], rank of the head is settled.
 After the code of the Head 1 or the Head 2 is input, display moves to [Head 2 code
input] or [Head 3 code input] individually.
 After the ink fill, display moves to the top menu of the adjustment.
 When the [Pause] key is pushed, display moves to the menu next to 1 hierarchy. At
this time, pay attention the code that input is not settling, although it is effective
2-4. Dyestuff
Mode for the head selection of dyestuff ink code.
Figure 5-43 showing the sequence.
Figure 5-43.
Item
Item
Item
SelecType
SelecType
SelecType
Input Head 1 Code
Input Head 2 Code
Input Head 3 Code
Press the [Enter] key to select
the input mode of Head 1.
Press the [Enter] key to select
the input mode of Head 2.
Press the [Enter] key to select
the input mode of Head 3.
Thank You For Using TheServiceManualShop.com
Thank You For Using TheServiceManualShop.com