3. Mode
33510
3/3
33510
Processor Standard Setting
$ Refilling Water Amount Setting 2 (Low Processing Amount)
Each refilling water amount is set in selecting Low Processing Amount for Refilling Water Level 2 of Correction
Setting for Refilling Water Amount Setting 2 (Standard).
Each refilling water amount can be set according to the amount of evaporation when processing amount is low (for
each machine or time of year).
IMPORTANT
• The initial values of Refilling Water Amount 2 (Low Humidity) and Refilling Water Amount 2 (Low Processing
Amount) are the same as that of Refilling Water Amount Setting 2. Do not change them.
If it is necessary to change the settings, the setting values are specified.
Distributed by: minilablaser.com
To Next Page
Loading...