4. Troubleshooting
46200
14/21
46200
Error message: Printer 3
No. 06222
Paper has jammed in the Processor loading unit.
Error message release
YES
Condition
Check Point
IMPORTANT
• If the error of the suffix number 00001, 00002 or 00003 is shown, confirm that the rollers of the paper advance unit 2 and
the processor loading unit are not dirty.
Suffix
number
Condition
00001 The paper sensor 2 (left) does not turn LIGHT even though the paper was fed to the processor loading unit.
00002 The paper sensor 2 (center) does not turn LIGHT even though the paper was fed to the processor loading unit.
00003 The paper sensor 2 (right) does not turn LIGHT even though the paper was fed to the processor loading unit.
1 Confirm that each sensor is not dirty.
2 Confirm that the pressure guide of the paper advance unit 2 is correctly attached.
3 Carry out Paper Sensor LED Light Intensity Adjustment in Functions of Paper Sensor Adjustment.
☞36000
Paper advance unit 2 Processor loading unit
Rollers
Rollers
Distributed by: minilablaser.com
To Next Page
Loading...