Frontier LP7500 - No. 06104 Printer Door Is Open

2/33
4. Troubleshooting
46100
46100
Error message: Printer 2
No. 06104
Printer Door is open.
Error message release
YES
Condition
NOTE
• Some electrical parts stop operations when the interlock switch (printer door 1, 2 or 4) or printer door 3 sensor turns off.
Check Point
Diagnosis
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Suffix number Condition
00001 While prints are being made, the interlock switch (printer door 1, 2 or 4) turns off.
00002 While prints are being made, the printer door 3 sensor turns off.
1 Check that printer doors 1, 2, 3, and 4 are securely closed.
Adjustment failure point Manual No.
Adjustment failure of attaching position of the interlock switch (printer door 1, 2, 4) -
Adjustment failure in the attaching position of the printer door 3 sensor -
Failed part Manual No.
Interlock switch (printer door 1, 2, 4)
☞63050
Printer door 3 sensor ☞63050
Printer I/O PCB 1 ☞66020
Triple magazine PCB
☞66050
Quad magazine PCB ☞66055
Printer control PCB ☞66000
Distributed by: minilablaser.com