Attention message: Tablet Replenishment
1/7
4. Troubleshooting
40600
40600
Attent ion me ssage: Ta blet Re plenishm ent
No. 00600[J]
The Tablet Cartridge is empty. CD
No. 00601[J]
The Tablet Cartridge is empty.BF
No. 00602[J]
The Tablet Cartridge is empty. STB
Attention message release
YES or automatic release
• The message will be automatically closed when the cartridge is replaced.
Condition
NOTE
• Printing can be performed until the Reservoir Count reaches Drop Limit if Order Display→Processor Status→Change→Tablet
Drop Reservoir is set to ON. (Tablet Drop is not to be carried out but water supply.)
Diagnosis
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Error message No. Condition
No. 00600-00000 CD Tablet Sensor 1 or 2 did not detect tablet even though the CD Drum motor was started.
No. 00601-00000 BF Tablet Sensor 1 or 2 did not detect tablet even though the BF Drum motor was started.
No. 00602-00000 STB Tablet Sensor 1 or 2 did not detect tablet even though the STB Drum motor was started.
Failed part Manual No.
Tablet Sensor
☞63310
Tablet replenishment driver PCB ☞66500
Processor control PCB ☞66200
Processor power supply 1
☞67400
Distributed by: minilablaser.com