Processor Standard Setting
1/1
3. Mode
33570
33570
Manual Kit Change [J]
Bringing up the display
Maintenance → Extension → Processor Settings → Processor Standard Setting → Manual Kit Change
!
!!
! Explanation
!
!!
! Manual Kit Change
When carrying out Manual Kit Change, the following values are to be initialized (setting value).
• Kit Correction Amount
• Kit Water Supply Amount Setting
• Kit Remains
• Drop Limit/without Replenishment Limit
• Total Cartridge Count
• Tablets Per Cartridge
• Basic Evaporation Refill Amount
NOTE
• When setting value is changed, the new setting is to be effective from the time when the manual kit change or kit end is carried
out, or kit end error occurs.
M5455-00
Distributed by: minilablaser.com
To Next Page
Loading...