For safe operation
1/1
1. Cautions for work
10040
10040
Prevention of static electricity when replacing and maintaining the
electrical parts
Static electricity from your body may damage electronic components such as PCBs, if you touch them when charged.
When handling electronic parts, be sure to use static-dissipative tools as below to prevent parts from being damaged by static electricity.
In addition, use the static-dissipative tools for maintenance of the digital units or engines.
Static-dissipative tools
• When using the static-dissipative tools, be sure to turn off the circuit breaker of the system and the main power supply,
and wait 10 seconds or more before performing the operation.
Description Remarks
Portable Static-Dissipative Field Service Kit Use this kit when replacing or installing/removing electronic parts from the system.
This kit consists of four items: Static-Dissipative Work Mat, Wrist Strap, Ground
Cord, and Alligator Clips.
Static-Dissipative conductive gloves Use these to prevent oil from your hands adhering when you touch a PCB.
Wrist strap Use this when checking electronic parts.
Distributed by: minilablaser.com
To Next Page
Loading...