4. Troubleshooting
40500
5/12
40500
Attention message: Processor
No. 00505
Remove the prints from the Print Sorter Unit.
Attention message release
YES or automatic release
• This attention message will be automatically closed when prints are removed.
NOTE
• While this message appears, the sorter is not activated.
Condition
Check Point
Diagnosis
NOTE
• To access the wiring diagrams, click Wiring diagrams in Bookmarks.
Suffix number Condition
00000 The print full sensor of the print sorter unit turns DARK.
1 Check that the print receiving tray and the print full sensor are not soiled.
Failed part Manual No.
Print full sensor
☞63271
Processor control PCB ☞66200
Distributed by: minilablaser.com
To Next Page
Loading...