2/2
3. Mode
35953
35953
Self-diagnostic
4. The Laser Self-Diagnostic display is shown.
!
!!
! End procedure
1. Click Cancel on Laser Self-Diagnostic.
2. Clicking execute performs Upgrade then returns to the Self-diagnostic mode.
3. End
FRONTIER-Printer: Ver. 2.01 or earlier, QSS-Printer: Ver.
4.02 or earlier
FRONTIER-Printer: Ver. 3.0 or later, QSS-Printer: Ver. 5.0 or
later
Click Cancel Click Execute
Distributed by: minilablaser.com
To Next Page
Loading...