2/2
4. Troubleshooting
4260
4260
Diagnosis appendix: Check the connection of the PC and printer
Example: Command Prompt display
Example: If "Destination host unreachable." is displayed
The communication is not normal. Check the following items.
(1) Confirm that the Ethernet interface cable has been correctly connected.
(2) Confirm that the settings of the IP address and the Subnet Mask are correct.
(3) If the HUB (line concentrator) is used, confirm that the power supply of the HUB is turned on.
After checking these items, go to Step 1 to repeat the procedure.
S063777
Distributed by: minilablaser.com
To Next Page
Loading...