Attention message: Edit
1/2
4. Troubleshooting
43370
43370
Attent ion me ssage: Edi t
No. 04001−04054
See the EZ Controller Troubleshooting Manual for Corrective action of Attention
message.
Condition
IMPORTANT
• Attention messages not explained in this Service Manual are listed in the table.
See the EZ Controller Troubleshooting Manual for Corrective action of Attention message.
Attention message (Edit)
Attention message table
No. 04001 Are you sure about deleting?
No. 04002 Red Eye Correction cannot be executed no more.
No. 04003 Image cannot be inserted into the specified position.
No. 04004 Graphics are too large to insert.
No. 04006 Prints cannot be made with this Print Channel. Select a Print Channel using a larger paper width.
No. 04010 Specify the image area.
No. 04015 Selected file already exists.
No. 04017 The head and jaw position is opposite, or the selected area is too small.
No. 04018 Would you like to quit the Edit Mode?
No. 04019 If you Import, all customer information will be deleted. Are you sure you want to Import?
No. 04020 Failed to write the file.
No. 04021 Failed to read the file.
No. 04023 Image magnification ratio or reduction ratio is out of range.
No. 04024 Select the layer.
No. 04025 This template has more than 16 layers. This template cannot be used.
No. 04026 The image size is too large to insert.
No. 04027 The same data already exists. Would you like to overwrite?
No. 04028 Failed to export the Image Save File.
No. 04029 The drive is empty.
No. 04030 Failed to delete the Exported Image Save Data.
No. 04031 There is insufficient space left on the disk.
No. 04032 Template size is too large to read.
No. 04033 Vertical templates cannot be used to make frame prints. Select a horizontal template.
No. 04034 A pupil could not be detected in the specified area.
No. 04035 Additional phrases could not be saved.
No. 04036 The image size is too small to insert.
No. 04037 The same file name already exists. Would you like to overwrite?
No. 04038 This file is CMYK data. Color cannot be converted correctly. Would you like to read the data?
No. 04040 The database was not changed. Confirm the property of each field.
No. 04041 A form larger than the print size cannot be used.
No. 04042 Single Form is not positioned.
No. 04043 A Single Form protrudes from the Print Area.
No. 04044 Single Form is overlapped.
No. 04045 No more than three Single Form types can be positioned.
No. 04046 When the Paper Setting is changed, the current position information is canceled.
No. 04047 The selected font was not found.
No. 04048 The image size is too small to make a Test Print.
No. 04049 No more items can be added.
Distributed by: minilablaser.com
To Next Page
Loading...