EasyManua.ls Logo

Frontier LP7500 - Page 624

Frontier LP7500
904 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error message: Scanner/ Film Carrier
1/2
4. Troubleshooting
46300
46300
Error messag e: Scanner / Film Carrier
No. 0630506463
Attention messages not explained in the Service Manual
Condition
IMPORTANT
Error messages not explained in the Service Manual are listed in the table below.
For corrective actions, see the Scanner Service Manual, EZ Controller Service Manual and Connection Unit Service
Manual.
See the Scanner Service Manual.
NOTE
In the Error message table, error message numbers that are not used currently may be listed.
See the Scanner Service Manual.
Error message table
No. 06305 Scanner Focus operation error.
No. 06306 Scanner IRIS operation error.
No. 06309 Scanner change of light error.
No. 06321 Focus auto adjustment error.
No. 06322 Scanner input balance error.
No. 06324 F stop value range error.
No. 06327 Scanner Light Source Section temperature adjustment error.
No. 06332 Light Source adjustment error.
No. 06333 The Line Data is out of the Standard Range Error.
No. 06334 Lane change operation error.
No. 06335 The Scanner Unit Cover is open.
No. 06336 Scanner Zoom operation error.
No. 06340 Analog offset adjustment error
No. 06341 Scanner image path error.
No. 06342 Scanner unit was disconnected. Check the power supply and the connection.
Error message table
No. 06400 Perforation Sensor error.
No. 06401 Loading Sensor error.
No. 06402 Ready Sensor error.
No. 06403 135 film has stopped at the Film Carrier.
No. 06404 240 film has stopped at the Film Carrier.
No. 06405 110 film has stopped at the Film Carrier.
No. 06406 120 film has stopped at the Film Carrier.
No. 06407 Spool Key operation error.
No. 06408 The Film Carrier is unlocked.
No. 06409 The 240 Cleaning Leader has stopped.
No. 06410 Film Sensor error.
No. 06411 Film Carrier Sensor Sensitivity Adjustment was not executed.
No. 06412 135 DX Sensor 1 error.
No. 06413 135 DX Sensor 2 error.
No. 06414 135 DX Sensor 3 error.
No. 06415 135 DX Sensor 4 error.
No. 06416 240 DX Sensor 1 error.
No. 06417 240 DX Sensor 2 error.
No. 06423 Auto focus error.
Distributed by: minilablaser.com

Table of Contents

Related product manuals