Frontier LP7500 - Page 642

4. Troubleshooting
49450
2/2
49450
Attention message: Main controller/ Setting module
See the EZ Controller Service Manual.
NOTE
• In the Attention message table, attention message numbers that are not used currently may be listed.
No. 10505
*1
Template size is too large to read.
No. 10506
*1
Template size is too small to read.
No. 10507
*1
Select the Use Layer.
No. 10508
*1
Image area is not specified. Specify at least one image area in order to register.
No. 10509
*1
The specified area is too small. It will be deleted.
No. 10510
*1
Would you like to delete the selected package?
No. 10511
*1
Would you like to delete all the packages?
No. 10512
*1
Woyld you like to delete the selected index?
No. 10513
*1
Would you like to delete all the indexes?
No. 10514
*1
Image dimension is not correct. Select the image of 3632x549 pixel.
No. 10515
*1
The image file format is not supported.
No. 10516
*1
The maximum allowable number of registration will be exceeded. No more template can be read.
No. 10517
*1
An index with the same name already exists. Change the title name.
No. 10518
*1
A package with the same name already exists. Change the title name.
No. 10519
*1
Template of the same name already exists. Change the name.
No. 10520
*1
Multi print of the same name already exists. Change the name.
No. 10521
*1
The maximum allowable number of registration will be exceeded. No more multi print can be read.
No. 10522
*1
Are you sure you want to delete all the multi prints?
No. 10523
*1
Are you sure you want to delete the selected multi prints?
No. 10524
*1
The maximum allowable number of registration will be exceeded. No more index can be read.
No. 10525
*1
Failed to create new title name. Enter another title name.
No. 10526
*1
The maximum allowable number of registration will be exceeded. No more package can be read.
No. 10527
*1
An index with the same name already exists. Change the title name.
No. 10528
*1
The maximum allowable number of registration will be exceeded. No more price sheet can be read.
No. 10529
*1
Are you sure you want to delete all the price sheets?
No. 10530
*1
Are you sure you want to delete the selected price sheets?
No. 10531
*1
Template of the same name already exists. Would you like to overwrite?
No. 10532
*1
Multi print of the same name already exists. Would you like to overwrite?
Attention message table
No. 15000 System error.
No. 15001 USB hardware key was not detected. Confirm that the hardware key is connected.
No. 15002 There is insufficient space on the hard disk. Delete the unnecessary file(s).
No. 15003 The drive specified for image storage is not available. Confirm the drive setting.
No. 15300 Failed to initialize the data.
No. 15301 Failed to read the data.
No. 15302 Failed to write the data.
Attention message table
Distributed by: minilablaser.com