EasyManua.ls Logo

Fujitsu PRIMERGY RX2530 M4

Fujitsu PRIMERGY RX2530 M4
470 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RX2530 M4 Upgrade and Maintenance Manual 155
Hard disk drive (HDD) / solid state drive (SSD)
Configuration with up to 10 PCIe SSD modules
I In the configuration with the 10x 2.5-inch HDD backplane with
10x Oculink connectors (NVME) and two Retimer controllers, you can
install up to 10 PCIe SSD modules (see section "Example two Retimer
controllers in riser modules 2 and 3" on page 229).
Figure 72: Configuration with up to 10 PCIe SSDs
1)
Retimer controller 1
2)
Retimer controller 2
3)
onboard controller
Position
Logical drive
number
ServerView RAID Manager display name
(Enclosure number: Port number)
[0] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[1] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[2] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[3] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[4] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[5] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[6] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[7] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[8] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
[9] -
Intel PCIe Device Adapter (device serial number):
Vendor Product
1) 3)2)

Table of Contents

Other manuals for Fujitsu PRIMERGY RX2530 M4

Related product manuals