Fujitsu PRIMERGY RX2530 M4 - Page 360

360 Upgrade and Maintenance Manual RX2530 M4
Serial interface
15.1.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
15.1.2 Removing the slot cover
Ê Remove the corresponding riser module, see section "Removing a riser
module" on page 68.
Ê Remove the corresponding slot cover, see section "Removing the slot cover
(only slot 2-4)" on page 221.
15.1.3 Installing the serial interface
Figure 271: Installing the serial interface - example riser module 1
Ê Insert the serial interface.