RX2530 M4 Upgrade and Maintenance Manual 361
Ê Install the corresponding riser module, see section "Installing a riser module"
on page 68.
Figure 272: Connecting the serial interface cable
Ê Connect the serial interface cable to the system board connector "SERIAL".
15.1.4 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 98
To Next Page
Loading...
