Fujitsu PRIMERGY RX2530 M4 - Page 362

362 Upgrade and Maintenance Manual RX2530 M4
Serial interface
15.2 Removing the serial interface
15.2.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
15.2.2 Removing the serial interface
Figure 273: Disconnecting the serial interface cable
Ê Disconnect the serial interface cable from the system board connector
"SERIAL".
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less