Fujitsu PRIMERGY RX2530 M4 - Page 363

RX2530 M4 Upgrade and Maintenance Manual 363
Serial interface
Ê Remove the corresponding riser module, see section "Removing a riser
module" on page 68.
Figure 274: Removing the serial interface - example riser module 1
Ê Remove the serial interface.
15.2.3 Installing the slot cover
Ê Install the corresponding slot cover, see section "Installing the slot cover
(only slot 2-4)" on page 232.
Ê Install the corresponding riser module, see section "Installing a riser module"
on page 68.
15.2.4 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 98