Fujitsu PRIMERGY RX2530 M4 - Page 364

364 Upgrade and Maintenance Manual RX2530 M4
Serial interface
15.3 Replacing the serial interface
15.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 77
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 52
15.3.2 Removing the defective serial interface
Ê Remove the serial interface, see section "Removing the serial interface" on
page 362.
15.3.3 Installing the new serial interface
Ê Install the serial interface, see section "Installing the serial interface" on
page 360.
15.3.4 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 63
Ê "Switching on the server" on page 66
Ê "Resuming BitLocker functionality" on page 98
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less