190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
150
Audio And CnS
SYSTEM
oVERViEW
FLiGHT
inSTRuMEnTS
EiSAudio & CnS
FLiGHT
MAnAGEMEnT
HAZARd
AVoidAnCE
AFCS
AddiTionAL
FEATuRES
APPEndiCESindEX
ADF TUNING
ADF frequencies in the 190.0-kHz to 1799.5-kHz range are entered in the standby ADF frequency field.
The system does not tune the ADF emergency frequency, 2182.0-kHz.
Selecting an ADF frequency:
1) Touch Audio & Radios to display the Audio & Radios Screen.
2) Scroll the list to find the ADF.
3) Touch the ADF control button to display the ADF Mode/Tuning Screen.
4) Use the keypad to select the desired frequency.
5) Touch the Enter Button to enter the new frequency as the ADF standby frequency; or touch the XFER Button
to enter the new frequency as the ADF standby frequency and transfer it to the active frequency.
Figure 4-31 ADF Mode/Tuning Screen
XFER Button
Enter Button
Find Button
Knob function labels
Or:
1)
Touch the Audio & Radios Button to display the Audio & Radios Screen.
2) Scroll the list to find the ADF.
3) Touch the ADF control button to display the ADF Mode/Tuning Screen.
4) Turn the large and small right knobs to tune the frequency (Large knob increases/decreases kHz; Small knob
selects .5 kHz).
5) Press the small right knob to enter the new frequency as the ADF standby frequency; or press and hold the small
right knob to transfer the new standby frequency to the active frequency.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
