190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
151
Audio And CnS
SYSTEM
oVERViEW
FLiGHT
inSTRuMEnTS
EiS Audio & CnS
FLiGHT
MAnAGEMEnT
HAZARd
AVoidAnCE
AFCS
AddiTionAL
FEATuRES
APPEndiCES indEX
Finding and selecting an ADF frequency:
1) Touch the Audio & Radios Button to display the Audio & Radios Screen.
2) Scroll the list to find the ADF.
3) Touch the ADF control button to display the ADF Mode/Tuning Screen.
4) Touch the Find Button to display the Find ADF Frequency Screen.
5) Touch the tab for the desired type of frequency (Recent, Nearest, Dest, Flight Plan, or Favorite).
6) Scroll the list to find the desired frequency.
7) Touch the frequency button to enter the new frequency as the ADF standby frequency.
Figure 4-32 Finding an ADF Frequency
Select a
tab for the
frequency
category
Select the
frequency
button to
tune the
standby
frequency
Find
Button
Transferring the active and standby ADF frequencies:
1) Touch the Audio & Radios Button to display the Audio & Radios Screen.
2) Scroll the list to find the ADF.
3) Touch the ADF volume slider to select the ADF for transfer.
4) Press and hold the small right knob to transfer the frequencies.
Figure 4-33 ADF Frequency Transfer
ADF Volume slider
ADF Transfer Knob Label
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
