190-01263-01 Rev. A
Garmin G2000 Pilot’s Guide for the Cessna T240
229
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeS inDeX
3) Touch the Waypoint Options Button to display the Waypoint Options Window.
4) Touch the Edit Button to display the Edit User Waypoint Screen.
5) Touch the Type Button to display the User Waypoint Type Window.
6) Touch the RAD/DIS Button, the RAD/RAD Button, or the LAT/LON Button to select the waypoint type.
7) Touch the REF Button, the RAD Button, the DIS Button, or the LAT/LON Button, as required, to bring up the
keypad.
8) Use the keypad and the Enter Button to select the user waypoint location.
9) Touch the Save Button to accept the new type and location.
10) Touch the OK Button in response to the question “Are you sure you want to modify this waypoint?”.
Changing the location of an existing user waypoint to the aircraft present position:
1) From Home, touch Waypoint Info > User Waypoint.
2) If necessary, touch the WPT List Tab to display the list of user waypoints, and touch the desired user waypoint
selection button.
3) Touch the Waypoint Options Button to display the Waypoint Options Window.
4) Touch the Edit Button to display the Edit User Waypoint Screen.
5) Touch the Type Button to display the User Waypoint Type Window.
6) Touch the P. POS Button to select the aircraft present position as the location.
7) Touch the Save Button to accept the new name.
8) Touch the OK Button in response to the question “Are you sure you want to modify this waypoint?”.
DELETING USER WAYPOINTS
Deleting a single user waypoint:
1) From Home, touch Waypoint Info > User Waypoint.
2) If necessary, touch the WPT List Tab to display the list of user waypoints, and touch the desired user waypoint
selection button.
3) Touch the Waypoint Options Button to display the Waypoint Options Window.
4) Touch the Delete Button.
5) Touch the OK Button in response to the question “Would you like to delete the user waypoint XXXXXX?”.
note: The option to ‘Delete All User Waypoints’ is not available while the aircraft is in flight.
Deleting all user waypoints:
1) From Home, touch Waypoint Info > User Waypoint.
2) Touch the Waypoint Options Button to display the Waypoint Options Window.
3) Touch the Delete All Button.
4) Touch the OK Button in response to the question “Would you like to delete all user waypoints?”.
This manual downloaded from http://www.manualowl.com
To Next Page
Loading...
