Garmin G2000 - Page 260

Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A246
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeSinDeX
a) Touch the Find Button to display the FInd Waypoint Screen.
b) Touch the Nearest, Recent, Flight Plan, or Favorites Tab and select the waypoint from from the list of
waypoints.
Or:
a) Touch the Find button to display the Find Waypoint Screen.
b) Touch the Search Tab to display the Search By Button.
c) If necessary, touch the Search By Button to choose Search by City or Search by Facility.
d) Touch the Facility Name Button or the City Name Button to display the keypad.
e) Use the keypad and the Enter Button to accept the entry and display the search results.
f) Touch a waypoint selection button to choose the waypoint.
4) Repeat step numbers 2 and 3 to enter each additional flight plan waypoint.
Creating an active flight plan using the GDU Controller:
1) Press the FPL Key.
3) Turn the small PFD Knob to display the Waypoint Information Window. (Turning it clockwise displays a blank
Waypoint Information Window, turning it counter-clockwise displays the Waypoint Information Window with a
waypoint selection submenu allowing selection of active flight plan, nearest, recent, or user waypoints).
4) Enter the identifier, facility, or city name of the departure waypoint or select a waypoint from the submenu of
waypoints and press the ENT Key. The active flight plan is modified as each waypoint is entered.
5) Repeat step numbers 3 and 4 to enter each additional flight plan waypoint.
6) When all waypoints have been entered, press the FPL Key or the CLR Key to remove the Waypoint Information
Window.
Creating a stored flight plan using the Touchscreen Controller:
1) From Home, touch Flight Plan > Flight Plan Options
2) Touch the Catalog Button to display the Flight Plan Catalog Screen.
3) Touch the Create New Catalog Flight Plan Button to display the Edit Stored Flight Plan Screen.
4) Touch the Add Waypoint Button to display the keypad.
5) Select the identifier of the departure waypoint. The active flight plan is modified as each waypoint is entered.
Use the keypad and the Enter Button to select a waypoint Identifier.
Or:
Use the right knobs to select a waypoint identifier.
Or:
a) Touch the Find Button to display the FInd Waypoint Screen.
b) Touch the Nearest, Recent, Flight Plan, or Favorites Tab and select the waypoint from from the list of
waypoints.
Or:
This manual downloaded from http://www.manualowl.com