Garmin G2000 - Page 264

Garmin G2000 Pilot’s Guide for the Cessna T240
190-01263-01 Rev. A250
Flight ManageMent
SYSteM
OVeRVieW
Flight
inStRUMentS
eiS
aUDiO Panel
& CnS
Flight
ManageMent
haZaRD
aVOiDanCe
aFCS
aDDitiOnal
FeatUReS
aPPenDiCeSinDeX
Figure 5-91 Edit Stored Flight Plan Screen - Waypoint Options Window
Insert After Button
Insert Before Button
Selected Waypoint
Waypoint Info Button
Remove Waypoint Button
Or:
1)
From Home, touch Flight Plan > Flight Plan Options
2) Touch the Catalog Button to display the Flight Plan Catalog Screen.
3) Touch a flight plan selection button to display the Catalog Options Window.
4) Touch the Edit Button to display the Edit Stored Flight Plan Screen.
5) Scroll to the end of the list, if necessary to show the Add Waypoint Button.
6) Touch the Add Waypoint Button to display the keypad is displayed.
7) Use the keypad, right knob, or the Find function to select the new waypoint.
8) Touch the Enter Button to accept the waypoint and place it in the flight plan.
Figure 5-92 Edit Stored Flight Plan Screen - Adding a Waypoint to the end of the Flight Plan
Add Waypoint Button
note: If the identifier entered in the Waypoint Information Window has duplicates, a ‘Duplicates found’
message is shown. Touch the Enter Button and the Waypoint Duplicates Screen is displayed. Touch a
waypoint selection button to select the correct waypoint.
This manual downloaded from http://www.manualowl.com